INCH-POUND
MIL-DTL-44117B
21 October 2011
SUPERSEDING
MIL-H-44117A
22 December 1986
MILITARY SPECIFICATION
HELMET, COMBAT VEHICLE CREWMAN, BALLISTIC SHELL, (DH-132B)
This specification is approved for use by all Departments and Agencies of the Department of
Defense (DoD).
1. SCOPE
1.1 Scope. This document covers the requirements for the DH-132B combat vehicle
crewman's (CVC) helmet consisting of a ballistic shell and an inner helmet with attached
microphone headset (see 6.9).
1.2 Classification. The helmet will be available in the following sizes as specified (see 6.2).
1.2.1 Complete Helmet Assembly (see Drawing 8-2-600)
1.2.1.1 Sizes.
Small - Small inner helmet with Medium shell
Medium - Medium inner helmet with Medium shell
Large - Large inner helmet with Large shell
1.2.2 Individual subassemblies. When needed individual subassemblies will be available as
replacement parts as specified below (see 6.2).
Outer Helmet Assembly - (see Drawing 8-2-601)
Inner Helmet Assembly (liner minus pads) - (see Drawing 8-2-602-3)
Inner Helmet Assembly (liner with pads) - (see Drawing 8-2-618)
Attachment Tab Assembly - (see Drawing 8-2-604)
Comments, suggestions, or questions on this document should be addressed to Attn: DLA
Troop Support Standardization Team, 700 Robbins Avenue, Philadelphia, PA 19111-5096.
Since contact information can change, you may want to verify the currency of the address
information using Acquisition Streamlining and Standardization Information System
(ASSIST) online database https://assist.daps.dla.mil/
AMSC N/A
FSC 8470
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business