MIL-DTL-44117B
Buckle Assembly (also comes with inner helmet assembly) - (see Drawing 8-2-605)
Chin Strap Pad Assembly (comes with inner helmet assembly) - (see Drawing 8-2-611)
Chinstrap Assembly - (see Drawing 8-2-603)
Pads (also comes with inner helmet assembly) - (see Drawing 8-2-618)
Earcup seals (see Contracting Activity)
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in Sections 3, 4 or 5 of this
specification. This section does not include documents cited in other sections of this specification
or recommended for additional information or as examples. While every effort has been made to
ensure the completeness of this list, document users are cautioned that they must meet all specified
requirements of documents cited in Sections 3, 4 and 5 of this specification whether or not they are
listed.
2.2 Government documents.
2.2.1 Specifications, Standards and Handbooks. The following specifications, standards and
handbooks form a part of this document to the extent specified herein. Unless otherwise specified,
the issues of these documents are those listed in the solicitation or contract.
FEDERAL STANDARDS
FED-STD-595/34094 Camouflage Green 483
DEPARTMENT OF DEFENSE SPECIFICATIONS
MIL-DTL-32075
-
Label: For Clothing, Equipage, and Tentage (General Use)
MIL-DTL-44050
-
Cloth, Ballistic, Aramid
MIL-DTL-46593
-
Projectile, Calibers .22, .30, .50 and 20MM Fragment-Simulating
MIL-DTL-64159
-
Camouflage Coating, Water Dispersible Aliphatic Polyurethane,
Chemical Agent Resistant
DEPARTMENT OF DEFENSE STANDARDS
MIL-STD-662
- V50 Ballistic Test for Armor
(Copies of these documents are available online at https://assist.daps.dla.mil/quicksearch/ or from
the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA
19111-5094.)
2.2.2 Other Government documents, drawings, and publications. The following other
Government documents, drawings, and publications form a part of this document to the extent
specified herein. Unless otherwise specified, the issues are those cited in the solicitation or
contract.
2
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business