MIL-DTL-44117B
TABLE VIII. End item visual examination - Continued
Examine
Defect
Classification
Major
Minor
Headset assembly
Any wire cut, cracked, or abraded
158
Earcups not installed in inner helmet as specified
159
Any component omitted, cracked, chipped, broken,
bent, or malformed
160
Pads, inner
Any pad installed with dimpled or scored surface of
helmet
pad facing outside in lieu of inside or any pad with
pimpled or scored surface omitted
247
Replacement
Any required component missing or not as
attachment
specified
161
strip/tab kits
Label printing not as specified
248
Label content not as specified:
- identification label
162
- instruction label
249
Label content not in specified sequence
250
Identification
Omitted, incorrect, illegible, or not as specified
251
label on helmet
shell
Barcode
Bar code omitted or not readable by scanner or
Label/Tag
Human Readible Interpretation (HRI)
252
Omitted or illegible.
253
Not visible on folded and or packaged item Causes
254
damage to item
163
Instruction
Omitted, printing or figures illegible, any page
booklet
omitted
255
1/ The helmet shell shall be examined from a distance of approximately 3 feet.
4.4.4 End item dimensional examination of completed helmet assembly. The attachment tabs
and fastener tape on the helmet shell shall be examined for dimensional defects in accordance with
drawings referenced in 3.6. The sample unit shall be one complete helmet assembly. The Lot
shall be expressed in terms of complete helmet assemblies of one size only. Any dimension
exceeding the applicable tolerance as specified in Table IV shall constitute a defect. The
inspection level shall be in the contract (see 6.2).
4.4.5 End item testing. The complete helmet assembly shall be tested for the characteristics
listed in Table IX. The lot shall be expressed in units of helmets of one size only. The sample unit
shall be one complete helmet assembly. When only shells are procured sound attenuation, impact
resistance and communication equipment operation shall not apply.
23
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business